PERFORATED
KONTRA
In most cases, it is not the large, spectacular designs that prove themselves in practice, but rather details that bring about a noticeable improvement in work processes and which are then quickly taken for granted.
The KONTRA series of floor-mounted locks offer a wide range of such details. These ideas were developed in collaboration with carpenters, window and staircase manufacturers, and have been perfected over the course of the past few years.
| TECHNICAL SPECIFICATIONS | |
|---|---|
| Model | |
|
KONTRA A1 A2 A3 |
Press length 1 x 1200 mm / floor Press length 2 x 600 mm / floor Press length 3 x 600 mm / floor |
|
KONTRA B1 B2 B3 |
Press length 1 x 1500 mm / floor Press length 2 x 750 mm / floor Press length 3 x 750 mm / floor |
| KONTRA C | Press length 1 x 1200 mm / floor |
| KONTRA D | Press length 1 x 1500 mm / floor |
| KONTRA E | Press length 2 x 1200 mm / floor |
| KONTRA F | Press length 4 x 600 mm / floor |
Equipped with casters.
All floors can be lifted individually, thus providing access to the work levels.
Highlights
Pendulum-mounted counter bearings
Since stair treads are known to have more than just right-angled corners, KONTRA floor gluing presses can be equipped on request to enable even sloping workpieces to be produced safely and to a high standard of quality.
Stable hold-down devices
Stable hold-down devices are essential for achieving accurate results. They are available in sufficient numbers in every press room. The thickness of the wood to be processed can be individually adjusted using permanently mounted hand wheels.
Pneumatically driven press elements
Pneumatically driven press elements guarantee uniform and gentle pressure distribution across the entire working width and, of course, optimum pressing force.
OUR NEW
2026 CATALOG
NEWSLETTER
SUBSCRIBE
BECK PRODUCTS
IN THE ONLINE SHOP
